Mold

3D Shot Glass Mold

The shot glass mold has been specially designed for sublimation in the 3D oven and consists of a silicone jig part and a sealed metal lid.

The air pump connects to the cover. The pressure exerted by the vacuum, presses the visual against the shot glass for a seamless and easier sublimation.

With this mold, you will be able to press up to 7 shot glasses at one time!

Instructions:

1-Remove the bottom part of the oven by unscrewing the air extraction cable.
2-Place the shot glasses in the silicone mold and close the metal lid.
3-Connect the air extraction cable to the metal lid.
4-Activate pump to vacuum air.
5-Close the oven and set the timer